用具および資源
製品仕様
注
| 口径範囲最大(in) | 4.5 |
| 口径範囲最大(mm) | 114 |
| 口径範囲最小(in) | 3 |
| 口径範囲最小(mm) | 76 |
| Brake Element Part Number | 142270KY |
| Clutch Element Part Number | 142270KP |
| D (in) | 30.25 |
| D (mm) | 768 |
| D1 (in) | 7.5 |
| D1 (mm) | 191 |
| D2 Inch | 6.94 |
| D2 MM | 176 |
| D24 (in) | 2.5 |
| D24 (mm) | 64 |
| D24 Inch | 2.5 |
| D24 MM | 64 |
| D25 Inch | 0.25 |
| D25 MM | 6 |
| D37 (in) | 6.8 |
| D37 (mm) | 173 |
| D38 (in) | 9.5 |
| D38 (mm) | 241 |
| D45 (インチ) | 7.406 |
| D45 (mm) | 188 1 |
| D7 (in) | 8 |
| D7 (mm) | 203 |
| ドラムJ (kg.m2) | 14 15 |
| Drum Mass (kg) | 108 |
| Drum Part Number | 411869 |
| Drum Weight (lb) | 237 |
| ドラムWk2 (lb.ft2) | 337 |
| Element (each) J (kg.m2) | 12 73 |
| Element (each) Mass (kg) | 67 |
| Element (each) Weight (lb) | 148 |
| Element (each) Wk2 (lb.ft2) | 303 |
| G Inch | 38 |
| G MM | 965,2 |
| G1 Inch | 35 |
| G1 MM | 889 |
| H2 (in) | 38.63 |
| H2 (mm) | 981 |
| H2 Inch | 36.75 |
| H2 MM | 933,5 |
| H6 Inch | 30.19 |
| H6 MM | 767 |
| H7 Inch | 36.5 |
| H7 MM | 927 |
| Hub Mass (kg) | 97 |
| Hub Mass J (kg.m2) | 2 90 |
| Hub Part Number | 406920 |
| Hub Weight (lb) | 213 |
| Hub Wk2 (lb.ft2) | 69 |
| L Dia Inch | 0.625 |
| L Dia MM | 16 |
| M (インチ) | 1.44 |
| M (mm) | 37 |
| 質量 (kg) | 495 |
| 注: ブレーキ | Part Number shown for element with one air inlet |
| 注: Clutch | Element sizes 12 and 14 have two inlets. All other sizes have four air inlets |
| 注: Weight/Mass | Based upon minimum bores. Rotorseal and hose not included |
| Number of Bolts | 16 |
| O (インチ) | 43167 |
| O (mm) | 43167 |
| O Dia Inch | 0.5 |
| O Dia MM | 13 |
| O4 Dia Inch | 41641 |
| O4 Dia MM | 41641 |
| Q Degree | 11.25 |
| Rotorseal Size | C2 |
| サイズ | 30CB525 |
| スパイダーJ (kg.m2) | 16 38 |
| Spider Mass (kg) | 155 |
| Spider Part Number | 407096 |
| Spider Weight (lb) | 341 |
| Spider Wk2 (lb.ft2) | 390 |
| トルク定格(N.m @ 5 2 bar) | 13700 |
| トルク定格(lb.in @ 75 psi) | 121000 |
| V Inch | 0.84 |
| V MM | 21 |
| W Inch | 5.25 |
| W MM | 133 |
| W Number | 18 |
| 重量 (lb) | 1093 |
| X (で) | 14.75 |
| X (mm) | 375 |
10.00 degrees for elements with one air inlet, 5.00 degrees for elements with two or four air inlets.